We Accept:
Belt Ordering Policy Minimum Order $20.00

Enfield Rifle Sling - Attachment Directions

  1. Take the thong out of all the holes from the end of the strap.

  2. Disassemble the sling by pulling the thong end out of the 2 keepers, leaving the keepers in place.

  3. Sling the thong end of the strap through the top loop of the musket that is near the end of the barrel, making sure the back of the strap is facing away from the gun.

  4. Send the thong end back through the 2 keepers and pull the sling down to the bottom loop by the trigger.

  5. Loop the thong under the loop and through it and send the thong through the underside by the trigger to the outer side of the sling and tie off, clipping some of the excess. Leave enough to re-tie it in the future.

(Follow photo sequence left to right and down)

1 2
3 4
5 6
7 8
9 10
11 12

Back to Enfield Slings
 
This site is best viewed on a maximized current Internet Explorer browser with a minimum monitor resolution of 800 x 600 set to a minimum of High Color. Dell's Leather Works is the owner and originator of the site content. This site and the imaging herein was created by Robert H. Sickler Graphic Design. Information in this document is subject to change without notice. Comments, questions or problems regarding this web site's functionality should be directed to the Webmaster. Copyright © 2008 Dell's Leather Works. All rights reserved.